fxo card,FXO Module
The FXO module allows the Asterisk card X400P card to terminate analog telephone lines (POTS). Because of the modular design, a user can activate additional ports at any time with more FXS or FXO daughter cards. The FXO module passes all the call features any standard analog telephone line will support.
2009-03-13
Asterisk card :FXS module
Asterisk card :FXS module
FOR ASTERISK
fxs card FXS Module
The FXS module allows the Asterisk card X400P card to terminate analog telephones.Because of the modular design, a user can activate additional ports at any time with more FXS module daughter cards. The FXS module passes all the call features any standard analog telephone will support.
Note: To use the FXS module, you must provide 12V DC power to the Asterisk card X400P, either from the computer's power supply.
FOR ASTERISK
fxs card FXS Module
The FXS module allows the Asterisk card X400P card to terminate analog telephones.Because of the modular design, a user can activate additional ports at any time with more FXS module daughter cards. The FXS module passes all the call features any standard analog telephone will support.
Note: To use the FXS module, you must provide 12V DC power to the Asterisk card X400P, either from the computer's power supply.
2009-03-01
te110p - Wildcard TE110P ISDN PRI pci e1 card
te110p - Wildcard TE110P ISDN PRI pci e1 card
The Wildcard te110p brings a high-performance, cost-effective, and flexible single span togglable T1/PRI or E1/PRI interface to the Digium line-up of telephony interface devices.
The TE110P is a single span, selectable E1 or T1 card that supports all the functionality of our quad T1/E1 card. That is you can select the E1 or T1 by a jumper.
This card supports both voice and data modes on its single span. For example, the card can support 12 channels dedicated to voice and 12 to data while passing all traffic through to the Asterisk Open Source PBX, which reliably routes the channels to their designated locations. This eliminates the need for an external router.
The te110p supports industry standard telephony and data protocols, including both RBS and Primary Rate ISDN (PRI) protocol families for voice and PPP, Cisco HDLC, and Frame Relay data modes. The board drives both line-side and trunk-side interfaces, including call features.
By utilizing our TDMoE (TDM over Ethernet) technology, an exclusive Digium process, one can easily connect multiple PCs equipped with the TE110P and achieve voice quality on par with single PBX implementations. Scalability for this product is derived from adding multiple TE110Ps to each individual PC. Add addition cards as you need them for your expanding applications.
The Wildcard te110p brings a high-performance, cost-effective, and flexible single span togglable T1/PRI or E1/PRI interface to the Digium line-up of telephony interface devices.
The TE110P is a single span, selectable E1 or T1 card that supports all the functionality of our quad T1/E1 card. That is you can select the E1 or T1 by a jumper.
This card supports both voice and data modes on its single span. For example, the card can support 12 channels dedicated to voice and 12 to data while passing all traffic through to the Asterisk Open Source PBX, which reliably routes the channels to their designated locations. This eliminates the need for an external router.
The te110p supports industry standard telephony and data protocols, including both RBS and Primary Rate ISDN (PRI) protocol families for voice and PPP, Cisco HDLC, and Frame Relay data modes. The board drives both line-side and trunk-side interfaces, including call features.
By utilizing our TDMoE (TDM over Ethernet) technology, an exclusive Digium process, one can easily connect multiple PCs equipped with the TE110P and achieve voice quality on par with single PBX implementations. Scalability for this product is derived from adding multiple TE110Ps to each individual PC. Add addition cards as you need them for your expanding applications.
Subscribe to:
Posts (Atom)